The New Unexpected Uses For Irish Whiskey In The Production High-Quality Graphene Material

Learning Centre > The New Unexpected Uses For Irish Whiskey In The Production High-Quality Graphene Material

Contents

In an unlikely marriage of science, researchers have found a way to produce high-quality graphene using Irish whiskey.

You would think a team of researchers turning to drink would mean bad news for science, but in fact it is leading to some exciting developments in the field of materials science. Researchers from the SFI Advanced Materials and Bioengineering Research (AMBER) centre at Trinity College Dublin have revealed a new way to produce graphene using Irish whiskey.

One increasingly popular method of producing the atom-thick, highly conductive ‘wonder material’ is liquid-phase exfoliation (LPE). Deemed to one of the most efficient and scalable means for producing high-quality graphene sheets, LPE is very versatile and has now been applied to a range of common layered materials including graphite, talcum powder and clay.

As part of a study published to 2D Materials, the AMBER researchers showed that graphene nanosheets free from defects can be exfoliated in Irish whiskey as well as inks that can be printed into nanosheet networks for use in electronics.

LPE is increasingly being used for low-cost electronic devices and sensors such as RFID tags, data storage and pixels in OLED TVs.

Why whiskey?

One of the most common ways of stabilising nanomaterials in a liquid or ink is to mix two different solvents. Previously, a blend of water and ethanol in a 60 to 40 ratio was shown to work, but was at too low a yield to be practical. However, the AMBER researchers tested the benefits of adding some organic compounds commonly found in commercial spirits such as whiskey.

The results showed that Irish whiskey is effective as a dispersant for nanosheets of graphene and other nanomaterials, yielding stable dispersions at reasonably high concentrations. The resulting dispersions were then refined into inks and printed onto working transistors.

This, the researchers said, proves that 2D devices permeated in whiskey compounds can still function and are robust against external contaminants.

Explaining the role Irish whiskey plays in the process, co-lead investigator of the study, Prof Jonathan Coleman, said: “Whiskey is uniquely suited for stabilising our nanomaterials because of the maturation process it must undergo. Before a spirit can be called a whiskey, it needs to be aged in a barrel for a minimum of three years, and over the three years the majority of the flavour compounds are added to the whiskey.

“Other clear spirits like vodka are ostensibly just water and ethanol so they lack the broad compound profile inherent to whiskey. These compounds are what help to stabilise our nanomaterials.”

The researchers have said it is still possible to boost the graphene nanosheet’s performance over time, but the fact they function at all in whiskey is a substantial breakthrough.

In an unlikely marriage of science, researchers have found a way to produce high-quality graphene using Irish whiskey.

You would think a team of researchers turning to drink would mean bad news for science, but in fact it is leading to some exciting developments in the field of materials science. Researchers from the SFI Advanced Materials and Bioengineering Research (AMBER) centre at Trinity College Dublin have revealed a new way to produce graphene using Irish whiskey.

One increasingly popular method of producing the atom-thick, highly conductive ‘wonder material’ is liquid-phase exfoliation (LPE). Deemed to one of the most efficient and scalable means for producing high-quality graphene sheets, LPE is very versatile and has now been applied to a range of common layered materials including graphite, talcum powder and clay.

As part of a study published to 2D Materials, the AMBER researchers showed that graphene nanosheets free from defects can be exfoliated in Irish whiskey as well as inks that can be printed into nanosheet networks for use in electronics.

LPE is increasingly being used for low-cost electronic devices and sensors such as RFID tags, data storage and pixels in OLED TVs.

Why whiskey?

One of the most common ways of stabilising nanomaterials in a liquid or ink is to mix two different solvents. Previously, a blend of water and ethanol in a 60 to 40 ratio was shown to work, but was at too low a yield to be practical. However, the AMBER researchers tested the benefits of adding some organic compounds commonly found in commercial spirits such as whiskey.

The results showed that Irish whiskey is effective as a dispersant for nanosheets of graphene and other nanomaterials, yielding stable dispersions at reasonably high concentrations. The resulting dispersions were then refined into inks and printed onto working transistors.

This, the researchers said, proves that 2D devices permeated in whiskey compounds can still function and are robust against external contaminants.

Explaining the role Irish whiskey plays in the process, co-lead investigator of the study, Prof Jonathan Coleman, said: “Whiskey is uniquely suited for stabilising our nanomaterials because of the maturation process it must undergo. Before a spirit can be called a whiskey, it needs to be aged in a barrel for a minimum of three years, and over the three years the majority of the flavour compounds are added to the whiskey.

“Other clear spirits like vodka are ostensibly just water and ethanol so they lack the broad compound profile inherent to whiskey. These compounds are what help to stabilise our nanomaterials.”

The researchers have said it is still possible to boost the graphene nanosheet’s performance over time, but the fact they function at all in whiskey is a substantial breakthrough.

Key Takeways

No items found.

Related Articles

No items found.
Join 70+ companies accelerating their product development with Innovolo
Farm+Stable is a client of Innovolo, a product development as a service provider offering R&D teams globally extra capacity, capability, and momentum in their product development and obsolescence management projects. As a company that specializes in the development and engineering of products for the agriculture and construction industries, Farm+Stable has benefited from Innovolo's expertise in helping to bring new products to market quickly and efficiently. In particular, Farm+Stable has been able to rely on Innovolo's team of experienced engineers to help with the design and development of a new line of products that are designed to be more durable and longer-lasting than previous models. With Innovolo's help, Farm+Stable has been able to bring these new products to market in a timely manner, and they have been well-received by customers. Thanks to Innovolo's innovative product development solutions, Farm+Stable has been able to stay ahead of the competition and continue to grow their business.
Innovolo is a product development as a service provider. It offers R&D teams globally extra capacity, capability, and momentum in their product development and obsolescence management projects. Its services are used by clients in a variety of industries, including automotive, aerospace, consumer electronics, and medical devices. One of its clients is Kawneer, a leading manufacturer of aluminum products for the architectural and construction industries. Kawneer has been using Innovolo's services to help develop new products and to manage the obsolescence of its existing products. Thanks to Innovolo, Kawneer has been able to speed up its product development cycle and to reduce its costs. As a result, Kawneer has been able to bring new products to market faster and to better meet the needs of its customers.

Related Tools and Templates

No items found.

Brands Mentioned

No items found.